HP EliteOne 1000 G1 Hardware Reference Manual page 21

6. Loosen the two captive screws at the base of the display head's neck (1). While holding onto the bottom
of the display head from the front with one hand, slide the display head back with your other hand to
clear it from the small metal retention tab, and then lift the display off the base (2).
IMPORTANT: The display head is heavy. Make sure you are holding the display head firmly when
removing it to prevent the display head from falling over and being damaged.
7. To replace the display head, hold the bottom of the display head from the front with one hand and place
the base of the display head's neck onto the bracket on the base unit and slide the display forward (1)
with the other hand. Then tighten the two captive screws that secure the display head's neck to the base
unit (2).
IMPORTANT: The display head is heavy. Make sure you are holding the display head firmly when
replacing it to prevent the display head from falling over and being damaged.
Removing and replacing the display head 15