Grasp the top of the rear panel on the display head at the webcam slot and pull the panel off the display
head at the connection points (1), and then slide the rear cover down the neck of the stand (2).
Remove the screws from the webcam blank (1), and then slide the blank back to remove it from the
display head (2).
Snap the rear panel onto the display head.
Insert the new webcam into the webcam slot on the display head and press the webcam down so that it
engages the internal latches.
Reconnect the power cord and any external devices, and then turn on the computer.
Chapter 3 Hardware repair and upgrade