Cartridge Alignment; Your Name And Number; Time And Date; Pc Connection - Toshiba e-Studio 60F User Manual

7 Insert the chip card "Plug 'n Print" with the contacts
facing up into the slot under the control panel and
confirm with OK. Remove the cartridge and repeat
the process for the second cartridge.

Cartridge alignment

1 After inserting the cartridges for the first time, the
machine will print out a page to check their align-
ment.
2 Enter the value A where the image is the clearest.
3 Confirm with OK and repeat these steps for values
B, C and D.

Your name and number

1 Enter your fax number (max. twenty digits) and
press OK (to enter a plus sign hold down the CTRL
key and press Q; to enter a blank space, press the
_@ key).
2 Enter your name by using the keyboard for text in-
put (max. twenty characters). You can also enter a
plus sign (CTRL and Q) or a slash (CTRL and M).
Press OK.

Time and date

Enter the date and time and confirm with OK, e. g.
12 09 03 16 30 OK for September 12
2003, 4:30 p. m.

PC connection

v Don't connect the e-STUDIO60F to a PC before
installing the software!
Minimum configuration
Your PC must have the following minimum configura-
tion:
• Pentium processor, 200 MHz or higher
• Windows 98/2000/ME/XP and 128 MB RAM
• 80 MB free disk space for the installation
• USB port

Software installation

v Don't connect the e-STUDIO60F to a PC before
installing the software!
If you receive a warning message that the pe-
ripheral hasn't passed Windows Logo testing,
choose "Continue Anyway". Your multifunctional
device has been tested for TOSHIBA and is fully
compatible with Windows XP.
1 Insert the CD-ROM into your PC. The installation
procedure will start automatically. Follow the in-
structions on the screen.
2 Connect the e-STUDIO60F to your PC with a USB
cable when you are prompted to do so.
VALUE A
VALUE B
3 Click "Next" and follow the instructions. Choose to
search for the driver on the CD-ROM:
th
9