Fax; Sending A Fax Y; Directory A - Toshiba e-Studio 60F User Manual

Fax

Sending a fax Y

There are two ways to fax a document: You can place
it onto the scanner glass (flatbed scanner) directly or
load it into the automatic document feeder.
Flatbed scanner
1 Open the flatbed scanner cover. Please make sure
that the scanner glass is clean before placing the
original.
2 Place the document face down onto the glass.
3 Align it with back left corner of the scanner (marked
with arrows).
If you want to scan small three-dimensional objects
(such as coins or flowers), use transparent film to pro-
tect the scanner glass.
4 Choose a fax number and press Y.
5 If you want to send just one page, use / to choose
DONE and press OK. If you want to send further
pages, choose NEXT PAGE and insert another page.
Then press OK.
After transmission, the e-STUDIO60F will automatically
print a transmission report.
If you want to cancel the transmission, press X twice.
Automatic feeder
If you are working with originals of an odd size or pho-
tos, please use the flatbed scanner.
A5 size documents should be inserted landscape.
The following points are the most common caus-
es of problems when inserting documents into the
feeder. Do not insert ...
• pages that are smaller than A5.
• pages from newspapers (printer's ink).
• stapled pages or pages with paper clips.
• creased or torn pages.
• wet pages or pages with corrections made with
correction fluid; dirty pages or pages with a
glossy or laminated surface.
• pages joined with sticky tape or glue, with adhe-
sive stickers such as "post-it
which are too thin or too thick.
1 Place the document face up into the document
feeder (up to 10 pages printed on 60–90 g/m² pa-
per).
2 Dial the fax number.
3 Press Y to start the transmission.
After transmission, the e-STUDIO60F will automatically
print a transmission report.
If you want to cancel the transmission, press X twice.

Directory a

1 Insert a document.
® " notes, or pages
10
13