Standard Version; Extended Version, Pro Device - Siemens SIMATIC IFP2200 Operating Instructions Manual

Distance of 5m to 30m
3.4.4.2

Standard version

Procedure
1. Connect the Flat Panel and the PC using a DVI or
2. If using a Touch version, also connect the device and
3.4.4.3

Extended version, PRO device

Procedure
1. Connect the Flat Panel and the PC
2. If the distance between the Flat Panel
3. If the distance between the Flat Panel
Note
Data transfer per USB transmitter module via USB1.1. The data transmission rate
corresponds to Full Speed according to USB1.1.
Industrial Flat Panel IFP1500, IFP1900, IFP2200, IFP1900 PRO, IFP2200 PRO, IFP1900 ETH, IFP2200 ETH
Operating Instructions, 07/2016, A5E31298376-AF
DisplayPort line.
the PC with a USB line.
using a DVI or DisplayPort line by
means of the respective interface.
and the PC is less than 5 m, connect
the Flat Panel and PC using the USB
Type B interface.
and the PC is less than 5 m, connect
the Flat Panel and PC with USB
transmitter module by means of the
USB-Link interface.
Installing and connecting the device
3.4 Connecting the device
59