Sena SMH10 User Manual

Using SMH10 with BMW Bluetooth Audio System (tested on BMW K1600)
Below instruction provides how to set up SMH10 with BT phone and BMW Bluetooth audio system
(including radio and GPS). If phone is not in use, by pass all phone steps. SMH10 and SMH10B have
different pairing and connection procedures.
Below is the connection diagram.
*Pairing must be done before the connection or re-connection attempt.
SMH10B (firmware update supported)
Paring
1. Pair the SMH10 to Bluetooth phone using SMH10's HFP selective pairing method (page 16 in
user manual).
2. Pair the SMH10 to BMW BT system using SMH10's A2DP selective pairing method (page 15 in
user manual). Once SMH10 is in A2DP pairing mode, follow below BMW BT system menu tree to
pair to SMH10.
a. Menu >> Settings >>Audio >> BT Pairing >> Pair Helmet1
b. Select SMH10 from the device listing.