Advertisement
Subsequent Reconnection – connections are completed automatically by following these steps.
1. Enable BT on your phone.
2. Power up the SMH10 and verify connection to BT phone.
3. Power up BMW BT system and verify connection (BMW main screen should display solid BT
symbol; symbol should not blink).
If BMW BT system does not auto-connect SMH10, please toggle BMW's loud speakers on and
off to re-initiate auto-connection by following below menu tree.
a. Menu >>Settings >> Audio >> Loud Speaker >> ON
b. Wait few seconds and select OFF.
SMH10 (firmware not supported)
Pairing
1. Pair the SMH10 to Bluetooth phone using SMH10's standard pairing method (press and hold
Phone Button for 5 seconds until LED displays alternating blue and red light and select SMH10
from phone's BT menu).
2. Pair the SMH10 to BMW BT system using SMH10's standard pairing method as used in above
step 1 with BT phone. Once SMH10 is in pairing mode, follow below BMW BT system menu tree
to pair to SMH10.
a. Menu >> Settings >>Audio >> BT Pairing >> Pair Helmet1
b. Select SMH10 from the device listing.
Connection and subsequent reconnection
1. Disable BT on your phone.
2. Power up SMH10.
3. Power up BMW BT system and verify connection with SMH10 (BMW main screen should display
solid BT symbol; symbol should not blink).
If BMW BT system does not auto-connect SMH10, please toggle BMW's loud speakers on and
off to re-initiate auto-connection by following below menu tree.
a. Menu >>Settings >> Audio >> Loud Speaker >> ON
b. Wait few seconds and select OFF.
4. Enable BT on your phone. If BT phone does not connect to SMH10 automatically, select SMH10
from phone's Bluetooth menu.
*BMW's GPS system will work as a standalone Bluetooth device. Connecting SMH10 to GPS will limit
BMW's radio audio to BMW's built-in speakers. To pair/connect SMH10 to GPS, refer to demo video.
http://www.youtube.com/senabluetooth#p/u/4/jIOYAlSDqMg
Advertisement
