Advertisement
INSTALLATION
A) In order to protect the disc player from shocks during shipping,
a shipping
screw is attached
to the disc player. Be sure to remove
d
this screw before installing
the unit into the vehicle. The compact
disc
player will not
operate
unless this screw, has been removed.
B) When mounting
the unit in a car, keep the unit as level as possible.
If the unit must be mounted
at an angle, due to the design
of the vehicle,
make sure the unit does not tilt by more than 302.
I
I
MOUNTING
BRACKET
(fiALF
SLEEVE)
AUDIO UNIT
~
1. insert the mounting
bracket
into the DIN–standard
cutout
(182
x 53 mm) in the dashboard
or consote.
2. Bend the mounting
bracket
stopper
outward
until the bracket
fits snugly in the cutout.
3. Install the supplied
mounting
screw (M5) in the audio unit.
Cover the mounting
screw
with the supplied
mounting
grommet.
4. Push the unit into the mounting
bracket
until it locks in place.
UNIT REMOVAL
I
I
AUDIO
UNIT
T
\
UNLOCK
LEVERS
FRONT
PANE'
—
1. Hemove the front p~el.
2. Insert the unlock levers into the slots on each side of the unit until they click into place.
r
'ofe
\
I
Take care not
to insert
the levers upside down.
I
3. While pressing
the levers
downward,
pull the levers to remove
the audio unit.
–13–
Advertisement
