Table of Contents
Advertisement
TP48200A-HT15D3 Telecom Power (Russia, Megafon)
User Manual
Figure 4-20 Removing a TEC
Step 3 Install a new TEC.
1.
2.
Step 4 Connect the power cables to the TEC control box securely.
Step 5 Switch on the TEC circuit breaker on the DC PDU.
Step 6 Disconnect the ground cable for the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
Follow-up Procedure
Pack the removed component, and return it to Huawei local warehouse.
Issue 03 (2019-11-15)
Place the TEC, and tighten the screws.
Place the cover on the cabinet door, and tighten the screws.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
71
Advertisement
Table of Contents
