Table of Contents
Advertisement
3.5 Adjusting on-screen display
3.6 To use the time shift feature
3.7 Setting for MediaHighway EPG
You can adjust the transparency level of on-screen display. Se-
lect the System Setting menu and set the OSD Transparency
option as you desire. Its available range is 0 to 50 percent.
You can adjust the display time of the information box. Refer
the information box to § 5.1.2. To adjust its display time, select
the System Setting menu and set the Info Box Display Time
option as you desire. Its available range is 1 to 30 seconds. If
you set this option to No Info Box, the information box will not
displayed when you switch services. However, pressing the
button displays the information box. If you set this option
to Never Hide, the information box will always be displayed.
You can raise or lower the position of the information box. Se-
lect the System Setting menu, and then set the Info Box Posi-
tion option as you desire. Its available range is
The more high the value is set, the more low the information
box will be positioned.
You can use the time shift feature with this digital receiver.
Time shift just means that the most recent hour of the televi-
sion service you are watching is saved on the hard disk of the
digital receiver. To enable this feature, select the System Set-
ting menu and set the Time Shifting option to Enable. For de-
tailed descriptions about the time shift function, refer to § 5.4.
Almost every service provider would provide electronic pro-
gram guide containing detailed program information. You
can get more abundant program information from a dedicated
transponder providing only electronic program guides than
general service providers. MediaHighway refers to the ded-
3.5 Adjusting on-screen display 27
10 to
3 line.
Advertisement
Table of Contents
