Table of Contents
Advertisement
3.5 Adjusting the On-Screen Display
3.6 Displaying the time in standby mode
You can adjust the transparency level of the On-Screen Dis-
play (OSD). Select the System Setting menu and set the OSD
Transparency option as you desire. Its available range is 0 to
50 percent.
You can adjust the display time of the information box. For the
information box, see § 5.2.3. To adjust its display time, select
the System Setting menu and set the Info Box Display Time
option as you desire. Its available range is 1 to 30 seconds. If
you set this option to No Info Box, the information box will not
be displayed when you switch services. However, pressing
the
button will display the information box. If you set
this option to Never Hide, the information box will always be
displayed.
In addition, you can raise or lower the position of the informa-
tion box. Select the System Setting menu and set the Info Box
Position option as you desire. Its available range is
lines. The higher you set the option, the lower the information
box will be positioned.
You can display the current time on the front display in standby
mode. To display the time, select the System Setting menu and
set the Standby Mode option to Active standby. Otherwise, set
it to Passive standby. When you set the Standby Mode option
to Active standby, the receiver can also bypass the signal from
the antenna.
3.5 Adjusting the On-Screen Display 21
10 to
3
Advertisement
Table of Contents
