Table of Contents
Advertisement
4.1.3 Configuring USALS settings
5. Finally select the Store command at the Motor Control
menu to save the tuned position when the receiving qual-
ity has turned good.
There are more motor control commands for installers, but this
manual does not describe them. If you are an installer, refer
them to the manual for the STAB rotor.
USALS (Universal Satellite Automatic Location System), also
known as DiSEqC 1.3, calculates the positions of all available
satellites from your location. Compared to DiSEqC 1.2, it is
no longer required to manually search and store every satel-
lite position. Just by pointing to a known satellite position is
enough. This position will act as the central point. The USALS
will then calculate positions of visible satellites.
To calculate every satellite position, perform the following steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Input your location to the My Longitude and My Latitude
options with the
3. Input the position of your selected satellite to the Satel-
4.1 Searching satellite broadcasting services 33
To use USALS, select the Instal-
lation
ALS Setting menu.
At first you have to set the Mo-
torized DiSEqC 1.3 option to
Enable.
,
and numeric buttons.
V
V
Satellite Setting
US-
Advertisement
Table of Contents
