Table of Contents
Advertisement
4.1 Searching satellite broadcasting services
4.1.1 Configuring LNB settings
You have to perform service search after connecting the digital
receiver.
This digital receiver can be operated with both fixed and mo-
torized antenna system. You have to configure antenna set-
tings according to your antenna system in the following order:
1. Configure LNB settings. (Refer to § 4.1.1.)
2. Set the position of your desired satellites if you have a
motorized antenna. You can control the antenna in DiS-
EqC 1.2 mode or USALS mode. Refer DiSEqC 1.2 to
§ 4.1.2, and refer USALS to § 4.1.3.
3. Perform service search.
There are in large two frequency bands for satellite broadcasts.
One is C band which ranges approximately from 4 to 6 GHz.
Chapter 4
Service Search
29
Advertisement
Table of Contents
