Searching Services - Topfield TF 5400 PVR Combo User Manual

Digital satellite & terrestrial receiver
Hide thumbs Also See for TF 5400 PVR Combo:
Table of Contents

Advertisement

34 Service Search

4.1.4 Searching services

lite Angle if it is not correct.
4. Select the Goto the position command. Then the antenna
will turn toward your selected satellite calculating its
position.
5. If the receiving quality, which is displayed on the right
bottom on the screen, is not good, tune the antenna finely
with the commands of the Move menu. The changed po-
sition is automatically saved at one. At this time you
had better check the receiving quality of every trans-
ponder and choose the best one at the Transponder (or
Frequency) option. It will be helpful to your fine tuning.
There are four service search methods:
• Searching every service of a satellite.
• Searching every service of a transponder.
• Searching one service of a transponder.
• Searching every service of a SMATV (Satellite Master
Antenna Television) transponder.
To search every service of a satellite, perform the following
steps:
To perform service search, select
the Installation
Service Search menu.
ting
Satellite Set-

Advertisement

Table of Contents
loading

Table of Contents