Using Varigate 4+ With Varigate 8+ And Voltage Block - Malekko VARIGATE 4+ Manual

USING VARIGATE 4+ WITH VOLTAGE BLOCK
The Varigate 4+ utilizes busboard clocks.
The Varigate 4+ ships in MASTER MODE. This means anything else connected to the busboard that includes busboard clocking
will slave to the Varigate 4+ clock.
To slave Voltage Block to the Varigate 4+, you'll need to set the Voltage Block to SLAVE MODE. Also make sure your Varigate 4+
jumpers are set to MASTER MODE. Slaving Voltage Block to Varigate 4+ allows you to save programmed parameters on your
Voltage Block within Varigate 4+ presets.
If you want to slave the Varigate 4+ to the Varigate 8+ to share clock, expand available channels and utilize all 100 Varigate 8+
presets, you will need to set your jumpers in reverse.
MASTER MODE
JUMPER SETTINGS
SLAVE MODE
JUMPER SETTINGS
VARIGATE 4+ MANUAL V.1
& VARIGATE 8+
PG. 12