Working In Conjunction With Varigate 8 - Malekko VOLTAGE BLOCK Manual

WORKING IN CONJUNCTION WITH VARIGATE 8+

The Voltage Block was designed to work exceptionally well along with the Malekko Varigate 8+. The following features are
prevalent when the Voltage Block is connected to the same bus as the Varigate 8+ and in "SLAVE" mode (where the master clock
is now the Varigate 8+).
Saving presets: While working on a given sequence on the Voltage Block, simply save the Varigate 8 preset and your Voltage
Block channel/preset will also save to that location. Voltage Block divisions and lengths are also saved in this fashion.
Recalling presets: same as above
Banks: Varigate 8+ includes 10 banks, each containing 10 presets therefor you can save up to 100 Voltage Block presets as well.
Song Mode: Saved Voltage Block presets are tied together along with Song Mode on Varigate 8+
Freeze and Random inputs: When these modes are active on the Varigate 8+, Varigate 8 will in turn send corresponding messag-
es to the Voltage Block. For instance if you have gates patched into the Random and Freeze inputs on Varigate 8+, those
Random and Freeze messages will carry over to Voltage Block.
A reset message is also sent from the Varigate 8+ to Voltage Block to lock timing.
VOLTAGE BLOCK MANUAL V.1
CLK IN
RESET
CLK OUT
C
D
E
F
G
A
B
GATE 1
PG. 12
MALEKKOHEAVYINDUSTRY.COM
VARIGATE 8+
DIVIDE/MULTIPLY ROOT + 4
PROB
SEQ LENGTH ROOT + 5
PW
SEQ MODE ROOT + 6
TRACK
KEY ROOT + 7
ROOT ROOT + 8
SONG
ROOT + 1 ROOT + 9
BANK/ALL
ROOT + 2 ROOT + 10
RND
ROOT + 3 ROOT + 11
GATE 2 GATE 3 GATE 4 GATE 5 GATE 6 GATE 7 GATE 8
RPT DLY
NOTE GLIDE
MUTE CLEAR
TEMPO
SAVE RECALL
FREEZE END
CV 1 CV 2