Track Mode - Malekko VARIGATE 4+ Manual

TRACK:
DIVIDE, MULTIPLY, SEQUENCE LENGTH, SEQUENCE MODE, PULSEWIDTH, SCALE, TEMPO COARSE AND TEMPO FINE can
be adjusted per CHANNELS 1-4. To enter TRACK MODE, simply select TRACK and the CHANNEL button you want to edit.
DIVIDE:
To DIVIDE a sequence for a given channel, move
the DIVIDE slider to the right. The position of the
slider affects the amount of division down to 1/8
(refer to LED bargraph while programming).
MULTIPLY:
To MULTIPLY a sequence for a given channel, move
the MULTIPLY slider to the right. The position of the
slider affects the amount of multiplication up to 8x.
LENGTH:
To change the length of a sequence for a given
channel, move this slider to the right. Sequence
length goes up to 8 steps per sequence or down to
1 (the LED bar graph indicates length).
SEQUENCE MODE:
To change the direction of a sequence for a given
channel, move this slider to the right. The LED bar
graph indicates the
directions: FORWARD, REVERSE, PENDULUM or
RANDOM in this order. Bar 1 on the bar graph is
FORWARD and so forth.
PULSEWIDTH:
Move this slider to the right to increase the width of
all gate pulses in a sequence. To decrease the width
of all pulses, move the slider to the left.
SCALE:
To change the SCALE of a particular sequence of
CV/NOTES specifically, move the slider to the right.
You'll see the LED bargraph indicating the different
available scales. From top to bottom on the LED
bargraph: Unquantized, Major Pentatonic, Minor
Pentatonic, Blues, Dorian,
Chromatic
VARIGATE 4+ MANUAL V.1

TRACK MODE

4 available sequence
Minor, Major,
TEMPO COARSE AND FINE: To change the tempo
move this slider to the right.
internal clock between 30 and 255 BPM. TEMPO
FINE adjusts the clock +/- 25 BPM. You can save
different tempos to different banks of presets.
Note that TEMPO adjustment is only available while
in internal clock mode.
PG.8
Coarse adjusts the