Table of Contents
Advertisement
QUICK REFERENCE GUIDE
GENERAL OPERATION
When the system is operating,
one of three displays will be
shown: time of day, gallons of
treated water available,
or gallons per minute .
Pressing
will
next
toggle between the
three choices .
TO SET TIME OF DAY
In the event of a
1 . Accessed by
prolonged power
pressing
outage, time of day
2 . Adjust hours with
flashes, indicating
+ and — buttons,
that this needs to
AM/PM toggles
be reset . All other
at 12 .
information will be
stored in memory
3 . Press
no matter how long
4 . Adjust minutes with
the power outage .
+ and — buttons .
Please complete the
5 . Press
steps as shown to
complete and
the right . To access
return to normal
this mode, press
operation .
.
set clock
ADJUST DAYS BETWEEN REGENERATION OR TIME
OF REGENERATION
For initial setup or to make adjustments,
complete the steps as shown to the right .
1 Access by pressing
and + button
next
simultaneously .
2 . Hardness display shows "-nA-" when
used as a filter .
3 . Press
next
4 . Adjust days between regenerations
using + and — buttons .
5 . Press
next
6 . Adjust time of regeneration hour with +
and — buttons, AM/PM toggles at 12 .
7 . Press
next
8 . Adjust time of regeneration minutes with
+ and — buttons .
9 . Adjust backlight display function with +
and — buttons .
10 . Press
to complete and return to
next
normal operation .
© 2016 Abendroth Water Conditioning. All rights reserved.
LIT-FB ISOFT MAN 11/16
set clock
next
to
next
MANUAL REGENERATION
NOTE: If you need to initiate a manual regeneration, either
immediately, or the same night at the pre-programmed time for
regeneration (typically 12:00 AM), complete the following steps .
For Immediate
Regeneration:
Press and hold
regen
until valve motor starts
(typically 3 seconds) .
For Regeneration the same night:
Press and release
(notice that flashing "REGEN TODAY" appears) .
regen
ERROR
If the display toggles between "Error"
and an error code (i .e . a number),
call a service technician and report
the error code .
BYPASS VALVE OPERATION
To shut off water to the system, position arrow handles as shown in
the bypass operation diagram below . If your valve doesn't look like
the diagram below, contact your service technician for instructions
on how to shut off water .
NORMAL OPERATION
Abendroth Water Conditioning
327 Janesville Avenue
Phone: 920-563-2507
BYPASS OPERATION
Fort Atkinson, WI 53538
•
www.abendrothwater.com
•
Advertisement
Table of Contents
