Using The Accessories - AEG BPE842720B User Manual

8. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
8.1 Food Sensor
Food Sensor measures temperature
inside the food. When the food is at the
set temperature, the appliance
deactivates.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the accessory
supplied and the original
replacement parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• The Food Sensor cannot be used for
liquid dishes.
• During cooking the Food Sensor must
remain in the dish and the plug in the
socket.
• Use recommended food core
temperature settings.
WARNING!
Refer to "Hints and tips"
chapter.
The appliance calculates an
approximate end of cooking
time. It depends on the
quantity of food, the set
oven function and
temperature.
Food categories: meat, poultry
and fish
1. Activate the oven.
2. Insert the tip of the Food Sensor into
the centre of meat or fish, in the
thickest part if possible. Make sure
that at least 3/4 of the Food Sensor is
inside of the dish.
3. Put the plug of the Food Sensor into
the socket at the front of the oven.
The display shows: Food Sensor.
4. Set the core temperature.
5. Set a heating function and, if
necessary, the oven temperature.
When the dish reaches the set
temperature the signal sounds. The oven
turns off automatically.
6. Press the rotary knob to stop the
signal.
7. Remove the Food Sensor plug from
the socket and remove the dish from
the oven.
WARNING!
There is a risk of burns as the
Food Sensor becomes hot.
Be careful when you unplug
it and remove it from the
food.
Food category: casserole
1. Activate the oven.
2. Place half of the ingredients in a
baking dish.
3. Insert the tip of the Food Sensor
exactly in the centre of the casserole.
The Food Sensor should be
ENGLISH 17