Installing Your Lip Phone 6812 - LG NORTEL 6812 User Manual

2. Installing your LIP Phone 6812

The figure below shows the cable connections for your LIP Phone. The LAN and desktop PC
connections employ standard category 5 cables terminated with RJ-45 connectors. The LIP Phone
supports PoE (Power over Ethernet) in accordance with the IEEE-802.1af standard. When connected to
a PoE complaint LAN port, the LIP Phone derives power from the port. If the LAN port does not support
PoE, use the AC/DC adaptor, available separately, for connection to power. The handset connects to the
base with the supplied standard handset coiled cord. Use the chart below to make connections to the LIP
Phone.
1 LAN Connect the LIP Phone LAN port to the LAN wall jack with the provided LAN
cable.
2 PC Connect the LIP Phone PC port to your desktop PC with RJ-45 terminated UTP-5
cable.
3 Power If the LAN port supports PoE (IEEE 802.3af compliant), the AC/DC adapter is not
required. If not supported, connect the LIP Phone power port to the DC out of
Power Adapter. Connect the Power Adapter AC plug to an AC wall jack.
4 Headset Connect Headset 2.5 mm plug to the LIP Phone headset jack.
5 Handset Connect the Handset coiled cord to the LIP Phone base and handset.
2
1 3
3
LIP Phone 6812
User Guide
4
5
Oct. 07