Announcing A Call Transfer; Using Blind Call Transfer; Call Forward - LG NORTEL 6812 User Manual

o Press the slow flashing line button, or the
To toggle between two calls on the same line:
o Press the line button, the active call status changes to hold and the held call connects.

3.4. Announcing a Call Transfer

Using Announcing a Call Transfer, you send an active call to another extension after announcing the call
transfer to the receiving party.
To transfer an active call:
[Trans]
o Press the
o Dial the number you wish to receive the transfer.
o Await answer and announce the transfer.
o To complete the transfer, hang up the handset.
To cancel a transfer, for example the second party does not answer or is busy:
[EndC]
o Press the

3.5. Using Blind Call Transfer

You can transfer an active call to another extension without talking to the party receiving the call. The call
transfers to the new party without verifying that the new party is there or willing to receive the call.
To transfer an active call without announcing the transfer:
[Bxfr]
o Press the
o Dial the number you wish to receive the transfer.
o To complete the transfer, hang up the handset.
To cancel a transfer, for example you mis-dial the receiving number:
[EndC]
o Press the

3.6. Call Forward

Call forward directs incoming calls to ring at another location that you designate. You can select one of
four (4) conditions that will forward your calls:
Call Forward Busy – redirects incoming calls if the line is busy.
-
Call Forward No Answer – redirects incoming calls that are not answered in the configured no
-
answer time.
Call Forward Busy or No Answer – redirects incoming calls if the line is busy or not answered
-
after the no answer time expires.
- Call Forward All Calls – immediately redirects all incoming calls.
To set up Call Forward:
[CFwd]
o Press the
[Prev]-[Next]
o Use the
[ OK ]
o Press the
o Input the destination where your want your calls sent.
[ OK ]
o Press the
To disable Call Forward:
softkey. The active call status changes to hold and you receive dial tone.
softkey.
softkey. The active call status changes to hold and you receive dial tone.
softkey.
softkey.
softkeys to select the desired Call Forward condition.
softkey.
softkey. The display shows "Fwd to xxx" indicating the destination for the calls.
[Rsum]
softkey.
5
LIP Phone 6812
User Guide
Oct. 07