Gps Searching - Holy Stone HS120D Instructions For Use Manual

11.4 GPS Searching

— Place the drone on a flat and dry surface where is unobstructed and lit .
— LED Flight Indicators will turn to blink Blue (Back) and White (Front) .
This means the drone is searching the GPS Signal.
This process will take a few minutes.
Once all the lights have turned solid, GPS Mode is Ready (Only when the
drone is connected to GPS successfully can it take off).
— Blue (back) and white (front) lights are all solid (no blinking).
ATTENTION:
① If the LED Flight Indicators keep blinking quickly, it indicates drone
is searching for GPS signals.
② If the drone keep blinking quickly after a few minutes, it indicates
that the process has FAILED. Please taking the drone a meter or so
from the ground,and repeat all the Compass Calibration operations
until the process is successful.
③ When flying indoors, please hold
GPS Mode, and the LED lights will blink slowly. You can fly this drone
when you complete the Compass Calibration operations if you exit
GPS mode.
( DO NOT use GPS Mode indoors )
-18-
button for 3 second to exit