Installation Instructions; Measuring The Mounting Hole Dimensions On The Projector - CHIEF SLMU Installation Instructions Manual

Installation Instructions

INSTALLATION INSTRUCTIONS
STEP 1 (Optional)
Measuring the Mounting Hole
Dimensions On the Projector
To minimize error, perform the following steps to
measure the approximate width and length between the
mounting holes on your projector.
1. Determine the width and length between the
mounting holes on your projector. If necessary, use a
tape measure.
a. If your projector is equipped with four mounting
holes, measure the width and length between the
mounting holes (see Figure 5.
b. If your projector is equipped with three mounting
holes, measure the width and length between the
mounting holes (see Figure 6).
2. Record the dimensions taken in step 1 for later use in
the next procedure.
Figure 5. Measure Width and Length Between
Mounting Holes in 4-Hole Projector (Example)
Figure 6. Measure Width and Length Between
Mounting Holes in 3-Hole Projector (Example)
SLBU/SLMU
OR
5