Switching Off - Barco Hydra Compact User Manual

3.3.3 Switching off

If the H C was operated with the iS
YDRA OMPACT
Therefore use the command Halt module of the Module menu, please refer to the iS
Module Control. This command halts the H
you also can use the command Halt wall from the Wall menu. When the
an output signal to the projection modules and they show their original display, e.g. a black or blue screen. If so
the H C can be switched off with the power switch [5] at the front of it.
YDRA OMPACT
Barco – Hydra Compact – R5976568 – Revision 10 – February-2004
software it must be halted before it can be switched off.
TUDIO
C . If you want to switch off all H
YDRA OMPACT
When the H
___________________________________________________________________________________________
3. Getting started
user's manual, section
TUDIO
C units of a wall
YDRA OMPACT
C is halted it stops to send
YDRA OMPACT
3-26