Table of Contents
Advertisement
4.4 Dual mode
In dual mode one H
YDRA
allows to display the sources of the H
section
Dual
Mode. To enable dual mode, the H
cards or with one DVI-DVI output card.
One Channel Output Card
Each output card is connected to one projection module. The first output card in the order they are inserted into
the H
C
(right one if looking from front on the H
YDRA
OMPACT
module, the second output card must be connected to the right projection module. The figure below
demonstrates the cabling in dual mode:
DVI-DVI Output Card
With the DVI-DVI output card in dual mode each connector of the card is used to provide data for one projection
module. Channel one (the upper connector) is connected to the left projection module (looking from front to the
projection modules) channel two is connected to the right projection module, please see also the figure below:
Barco – Hydra Compact – R5976568 – Revision 10 – February-2004
C
is connected to two projection modules. A special setting of the iS
OMPACT
C
YDRA
OMPACT
YDRA
Output Card 2
Channel 1
Hydra Compact
on both modules, please refer also to the iS
C
must either be equipped with two one channel output
OMPACT
C
) must be connected to the left projection
YDRA
OMPACT
Display Wall
Output Card 1
Hydra Compact
Scheme of dual mode connection for one channel output cards
Display Wall
Channel 2
Output Card
Scheme of dual mode connection for DVI-DVI output cards
____________________________________________________________________________________________
4. Operating
software
TUDIO
user's manual
TUDIO
Figure 4-2
Figure 4-3
4-5
Advertisement
Table of Contents
