Table of Contents
Advertisement
1.3.2 Unpacking of devices
Note advises on the packaging for unpacking!
1.3.3 Installation
•
Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage to it.
•
Do not use this unit near water.
•
Use only the power cord supplied with your unit. While appearing to be similar, other power cords have not
been safety tested at the factory and may not be used to power the unit. For a replacement power cord,
contact your dealer.
•
Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable operation of
the unit and to protect it from overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat register. This unit should not be placed in a built-in
installation or enclosure unless proper ventilation is provided.
•
The maximum recommended ambient temperature for this equipment is 40°
•
When using the unit in a multi-unit rack assembly or closed assembly the ambient temperature inside the
assembly may not succeed the maximum rated ambient temperature. We advice to keep a distance of one U
between a H
C
YDRA
OMPACT
•
When installed in a rack, the installation should be such that the amount of air flow required for safe
operation of the equipment is not compromised. The mounting of the equipment should be such that no
hazardous condition is achieved due to uneven mechanical loading. Reliable earthing of the equipment
mounted in the rack should be maintained through the power distribution in the rack. Observe that the total
of the ampere ratings on the rating plates of the equipment in the rack does not overload the supply wiring
of the rack.
1.3.4 Servicing
Mechanical or electrical modifications others than described in this manual must not be made to the devices.
Barco is not liable for damages resulting from modified devices.
Only authorized personnel should carry out other maintenance work not explicitly
mentioned in this installation manual!
Never open the case of H
Measurements and tests with the opened device may be carried out only in the factory or
by specially trained personnel, due to the dangers of electrical shock.
1.3.5 Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. See sec-
tion
5.3 Cleaning
for a cleaning instruction!
1.3.6 Re-packing
Keep the original shipping carton and packing material; they will come in handy if you ever have to ship your
unit. For maximum protection, repack your set as it was originally packed at the factory.
Barco – Hydra Compact – R5976568 – Revision 10 – February-2004
and another device in the rack for reasons of cooling.
C
without first disconnecting the power supply cords!
YDRA
OMPACT
____________________________________________________________________________________________
quipment is 40° C.
maintenance work not explicitly
1. Introduction
1-6
Advertisement
Table of Contents
