Table of Contents
Advertisement
DVST
Description:
Command syntax:
Query syntax:
Other required cmds:
Example:
26
Chapter 3 HDMI Command Reference
Digital Video Signal Type
The DVST command establishes the kind of video signal that exits the digital video signal
outputs of the generator. The DVST? query returns the current setting of DVST.
DVST type
Where type is:
0 = none
10 = RGB
13 = YCbCr per SMPTE 260M-1999 Table 1
14 = YCbCr per ITU-R BT.601-5 Table 3, Item 7
15 = YCbCr per ITU-R BT.709-5 Part 1, Section 6.10
DVST?
AVST must be set to zero. The ALLU command updates the hardware to the new setting
and redraws the test image.
AVST 0
// Deselect analog video in buffer
DVST 10
// Select digital RGB
FMTU
// Update hardware to current buffer contents
Advertisement
Table of Contents
Need help?
Do you have a question about the 802BT and is the answer not in the manual?