Icematic And Ice Storage Container; Using The Water Dispenser - Beko 670560EI User Manual

Hide thumbs Also See for 670560EI:
Table of Contents

Advertisement

Available languages

Available languages

Using the product

5.21. Icematic and ice storage container

*optional
Using the Icematic
Fill the Icematic with water and place it into its seat.
Your ice will be ready approximately in two hours. Do
not remove the Icematic from its seating to take ice.
Turn the knobs on the ice reservoirs clockwise by
90 degrees.
Ice cubes in the reservoirs will fall down into the ice
storage container below.
You may take out the ice storage container and
serve the ice cubes.
If you wish, you may keep the ice cubes in the ice
storage container.
Ice storage container
Ice storage container is only intended for
accumulating the ice cubes. Do not put water in it.
Otherwise, it will break.
Refrigerator / User Guide

5.22. Using the water dispenser

*optional
C
It is normal for the first few glasses of
water taken from the dispenser to be
warm.
C
If the water dispenser is not used for a
long period of time, dispose of first few
glasses of water to obtain fresh water.
1. Push in the lever of the water dispenser with your
glass. If you are using a soft plastic cup, pushing
the lever with your hand will be easier.
2. After filling the cup up to the level you want, rele-
ase the lever.
C
Please note, how much water flows
from the dispenser depends on how far
you depress the lever. As the level of
water in your cup / glass rises, gently
reduce the amount of pressure on the
lever to avoid overflow. If you slightly
press the arm, the water will drip; this
is quite normal and not a failure.
27/36EN

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

670560eb670560escBjk1903670560ea670560ebc

Table of Contents