Transmit The Scanned Data Via E-Mail (E-Mail Tx); Preparation Flow - Konica Minolta Bizhub C759 Quick Manual

3
3.2.4

Transmit the scanned data via E-mail (E-mail TX)

Send scanned data as an E-mail attachment.
This function allows you to receive data at an outside location, which is useful when a quick measure is re-
quired.

Preparation flow

The following describes a preparation flow for sending scanned data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-29.
2
Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-29.
3
Configuring the E-mail transmission environment (Administrator)
% Configure a server for E-mail TX. For details, refer to page 3-30.
4
Configuring administrator information (Administrator)
% Register the administrator name and E-mail address used as the sender's address of an E-mail to
be sent. For details, refer to page 3-32.
3-28
Scan-to-Send function
bizhub C759/C659, AccurioPrint C759
3.2