Setting Pauses - BT Diverse 4000 Classic User Manual

To switch temporarily from
pulse to tone dialling
If you are using pulse dialling with
your switchboard but need tone
dialling to use certain functions on
your Diverse 4010 you can switch to
tone dialling during the call.
During the call:
Press the MENU button.
MENU
Press the DOWN button
until the display shows
TEMP TONE.
Press the OK button.
OK
Tone dialling is now active.
Please note
This setting is only for the duration
of the call.
All manuals and user guides at all-guides.com

Setting pauses

Please note
If you want to insert a pause into
a telephone number you are storing
in your directory, start storing the
number (see page 16) and where
a pause is needed, press and hold
the button. A'
R
the number.
To set a pause before dialling
You can insert a pause to allow your
switchboard time to get a line
before your Diverse 4010 dials the
number.
MENU Press the MENU button.
8 Press the 8 button.
TUV
Press the 9 button.
9
WXYZ
Press the 1 button.
1
6 Press the 6 button.
MNO
Enter the pause length:
1 = 1 second
2 = 3 seconds
3 = 7 seconds
4 = 2.5 seconds
P ' will appear in
41