Toro Reelmaster 3555 Series Installation Instructions Manual page 15

The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
—
133-0153
—
133-0154
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
John Heckel
Sr. Engineering Manager
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
February 14, 2019
Declaration of Incorporation
Product Description
Rear Roller Brush MVP Kit,
Reelmaster 3555, 5010,
and 5010-H Series 22-inch
Cutting Unit with 5-inch Reel
and Universal Groomer
Rear Roller Brush MVP Kit,
Reelmaster 3575 or 5010-H
Series 22-inch Cutting
Unit with 7-inch Reel and
Universal Groomer
Invoice Description
RM5010/RM3555 5" 22"
RRB(UNIVSL)MVP KIT
RM5010/RM3575 7" 22"
RRB(UNIVSL)MVP KIT
Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro Europe NV
Nijverheidsstraat 5
2260 Oevel
Belgium
General Description
Roller Brush Kit
Roller Brush Kit
Directive
2006/42/EC
2006/42/EC