Levelling The Appliance; About Power Connection; Electrical Requirements; Electrical Connection - FAR LV12C47MI17IX Instruction Manual

ENGLISH
walls. The dishwasher is equipped with water
supply and drain hoses that can be positioned
either to the right or the left sides to facilitate
proper installation.

Levelling the Appliance

Once the appliance is
positioned for levelling, the
height of the dishwasher may
be altered via adjustment of
the screwing level of the feet.
In any case, the appliance
should not be inclined more
than 2°.

About Power Connection

WARNING!
For personal safety:
• Do not use an extension cord or an adapter
plug with this appliance.
• Do not, under any circumstances, cut or
remove the earthing connection from the
power cord.
GB-48

Electrical Requirements

Please look at the rating label to know the
rating voltage and connect the dishwasher to
the appropriate power supply. Use the required
fuse 10 amp, time delay fuse or circuit breaker
recommended and provide separate circuit
serving only this appliance.

Electrical Connection

Insure proper ground exists before use
Ensure the voltage and frequency of the power
being corresponds to those on the rating plate.
Only insert the plug into an electrical socket
which is earthed properly. If the electrical socket
to which the appliance must be connected is
not appropriate for the plug, replace the socket,
rather than using an adaptors or the like as they
could cause overheating and burns.
ENGLISH
GB-49