Table of Contents
Advertisement
3 Disassembly and Reassembly
4. Remove the Stand Rear from the Stand
assembly.
5. Remove the Stand Front from the Stand
assembly.
6. Remove the Neck Rear from the Stand
assembly.
7.
Remove 4 Rubbers on the four corner of the
Stand Bottom and 4 screws on the four corner
of the Stand Bottom.
8. Remove 5 stopper hings from the Bracket
Bottom.
9. Remove the Stand Base from the Stand
Assembly.
3-2 Replacement Order of Lamp Assemblies (CN15VS/CN15VO : Samsung Panel)
3-2
3-1-6 Wire frame stand Disassembly (option)
1. Carefully pull the cover hinge.
2. Remove the cover vesa from the Stand
assembly.
3. Remove 4 screws on the assembly Bracket
assembly.
(CN15VS/CN15VO : TORISAN Panel)
1. After confirm there is nothing
on the disk
Turn the LCD module over
and put it on a flat desk set to
the ground.
2. Push down the stopper and
slide the lamp unit.
CN15V*
Advertisement
Table of Contents
