Technical Information - Dustbane Hurricane 400 XTT Operation Manual

3. Technical Information

3.1. General description
This machine is an automatic scrubber for sweeping, washing and drying flat, horizontal, smooth or moderately
rough, even and obstacle free floors in civil and industrial premises.
The automatic scrubber spreads a solution of water and detergent in the correct concentration on the floor and
then scrubs it to remove the dirt. By carefully choosing the detergent and brushes / pads from the wide range
of accessories available, the machine can be adapted to a wide range of combinations of types of floor and dirt.
A suction system incorporated in the machine dries the floor after washing by means of the low pressure
generated in the dirty water drum by the suction motor. The squeegee connected to the recovery tank collects
the dirty water.
The machine is moved forward by:
Non-Traction drive: the auto scrubber is provided with a special mechanical drive device which exploits
the friction between the brush and the floor to generate a forward movement (for further details, see
paragraph 6.7).
Traction drive: the auto scrubber is moved forward by means of a special electromechanical drive device.
3.2. Legend
The main parts of the machine are as follows:
1. Control panel
2. Recovery tank – collects the dirty water picked up from the floor after washing [Ref. 2]
3. Head lift pedal – raises the brush head during transport [Ref. 3]
4. Head assembly – holds the brushes / pads [Ref. 4]
5. Brushes / pads – distribute the chemical solution on the floor and removes the dirt [Ref. 5]
6. Squeegee assembly – wipes and dries the floor by collecting the water [Ref. 6]
7. Solution tank – contains and transports the mixture of clean water and chemical solution [Ref. 7]
Fig./Abb./ 2
图
Fig./Abb. 1
图
Fig./Abb./ 3
图
3