Routine Maintenance - Dustbane Hurricane 400 XTT Operation Manual

9.2. Routine maintenance

9.2.1 Suction motor air filter and float switch: cleaning
1. Unscrew and remove the tank cap (ref. 1) from the dirty water drum (ref. 4);
2. Make sure the dirty water drum (fig. 10, ref. 4) is empty;
Clean the float switch (ref. 5) at the back of the dirty water drum, taking care not to direct the water jet directly
against the float switch;
3. Remove the suction motor air filter (ref. 2) from the float switch support (ref. 3) inside the dirty water drum
at the top;
4. Clean the filter with running water or the detergent solution used on the machine;
5. Dry the filter thoroughly before replacing it in the support. Make sure the filter is correctly located
in its housing;
6. Screw the cap back on the dirty water drum.
9.2.2 Basket filter: cleaning
1. Remove the basket filter from the water fill hole at the front of the machine;
2. Clean the filter with running water or the detergent solution used on the machine;
3. Replace the filter back in its housing, making sure it is correctly positioned.
Fig./Abb./ 9
图
9.2.3 Detergent filter: cleaning
1
Fig./Abb./ 10
1. Unscrew the screw located below the bottom tank (ref. 1);
图
2. Unscrew the detergent filter (ref. 2);
3. Clean the filter with running water or the detergent solution used on the machine;
4. Replace the filter back in its housing, making sure it is correctly positioned and retighten the screw.
18
Fig./Abb./
Fig./Abb./
Fig./Abb./ 7
图
Fig./Abb./
2
3
4
5
Fig./Abb./
9
图
1 2
10
图
8
图
11
图
Fig./Abb./ 8
图
3
4
5
Fig./Abb./ 11
图