Rules For Installation; Fire Safety - LA NORDICA Giulietta Instructions For Installation, Use And Maintenance Manual

GIULIETTA – ISETTA-07 – ISOTTA-07

3. RULES FOR INSTALLATION

The stove, assembled and ready for the installation, must be connected with a junction to the existing flue
of the house. The junction must be possibly short, straight, horizontal or positioned a little uphill. The
connections must be tight.
It is obligatory to respect the National and European rules, local regulations concerning building
matter and also fireproofs rules. Please apply to your chimney sweeper for all information.
You should verify the sufficient air entrance for the combustion in the installation place, with particular
attention to windows and doors with tight closing (seal ropes).
It is not allowed the connection of various appliances to the same chimney. The diameter of the opening for
the connection must correspond at least to the diameter of the smokes pipe. The opening should be
equipped with a wall connection for the reception of the exhaust pipe and a rose window.
Before installation, verify if your floor can support the weight of the stove (for ex. distributing weight plate).
LA NORDICA is not responsible in case of modification of the product and for the use of not
original spare parts.
THE HEARTHS MUST NOT BE MODIFIED.

4. FIRE SAFETY

In the installation of the stove the following safety measures are to be followed:
a) the minimum distance from objects or furnishing components flammable and sensitive to heat
(furniture, wood sheathings, fabrics. etc.) and from materials with flammable structure must be 20 cm's
on the back and on both sides (Picture 3 A).
b) in front of the chimney stove there must not be any flammable object or building material, sensitive to
heat, at less then 100 cm's. of distance. This distance can be reduced to 40 cm's if you will install in
front of the element to protect a retro ventilated and heat resistant protection. All minimum safety
measures are indicated in the plate of the products and they must be absolutely respected.
c) if the chimney stove must be installed on a non totally refractory floor, one must foresee a fireproof
background, for example a steel platform dimensions according to the local regulations. The platform
must stick out 20 cm's on the back side, 30 cm's sideways and 50 cm's on the front side over the
loading door (Picture 3 B)
Picture 3
The chimney stove must operate exclusively with the ash drawer inserted. The solid residue of the
combustion (ashes) must be collected in a hermetic container, resistant to fire. The stove must never be
ignited when there are gas or steam emissions (e.g. glue for linoleum, gasoline, etc.). Never deposit
flammable materials near the stove.
Instructions for installation, use and maintenance – EN – Rev.04 19