Pto Switch - Toro Reelmaster 7000-D Operator's Manual

diagnostics and other information about the machine
(Figure 27).

PTO Switch

The PTO switch (Figure
and S . Push the PTO button forward to engage
TOP
the cutting-unit blades. Push the button back to
disengage the cutting-unit blades.
1. Lower mow/raise control
lever
2. Key switch
3. InfoCenter
Engine-Speed Switch
The engine-speed switch
change the engine speed. By momentarily tapping
the switch, you can increase or decrease the engine
speed in 100 rpm increments. Hold the switch down
to move the engine speed directly to high or low idle,
depending on which end of the switch is pressed.
Headlight Switch
Pivot the switch downward to turn on the headlights
(Figure 27).
Power Point
Use the power point (Figure
12-volt electrical accessories.
27) has 2 positions: S
Figure 27
4. PTO switch
5. Engine-speed switch
6. Headlight switch
(Figure 27) has 2 modes to
28) to power optional
TART
1. Power point
2. Fan reverse
g021208
Bag Holder
Use the bag holder
Backlap Levers
Use the backlap levers for backlapping the reels
(Figure 29).
1. Front backlap lever
21
Figure 28
3. Bag holder
4. Hour meter
(Figure 28) for storage.
Figure 29
2. Rear backlap lever
g010239
g015076