Table of Contents
Advertisement
3.7
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the other BIOS items.
Q-fan Configuration
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
WATER PUMP+ Control
[Disabled]
[Auto]
[DC mode]
[PWM mode]
AIO PUMP Control
[Disabled]
[Auto]
[DC mode]
[PWM mode]
3.8
Boot menu
The Boot menu items allow you to change the system boot options.
Boot Configuration
Fast Boot
[Disabled]
[Enabled]
The following item appears only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[Normal Boot]
[Fast Boot]
Boot Logo Display
[Auto]
[Full Screen]
[Disabled]
3-18
Disable the Water Pump control feature.
Detects the type of water pump installed and automatically switches
the control modes.
Enable the Water Pump control in DC mode for 3-pin chassis fan.
Enable the Water Pump control in PWM mode for 4-pin chassis fan.
Disable the AIO Pump control feature.
Detects the type of AIO pump installed and automatically switches
the control modes.
Enable the AIO Pump control in DC mode for 3-pin chassis fan.
Enable the AIO Pump control in PWM mode for 4-pin chassis fan.
Allows your system to go back to its normal boot speed.
Allows your system to accelerate the boot speed.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
Sets the boot logo to display during POST.
Sets the boot logo display in full screen during POST.
Disables the boot logo display during POST.
Chapter 3: BIOS Setup
Hide quick links:
Advertisement
Table of Contents
