Asus PRIME TRX40-PRO Manual page 38

15. System Panel connector
The System Panel connector supports several chassis-mounted functions.
• System Power LED connector (PLED)
The 2-pin connector allows you to connect the System Power LED. The System
Power LED lights up when the system is connected to a power source, or when you
turn on the system power, and blinks when the system is in sleep mode.
• Storage Device Activity LED connector (HDLED)
The 2-pin connector allows you to connect the Storage Device Activity LED. The
Storage Device Activity LED lights up or blinks when data is read from or written to the
storage device or storage device add-on card.
• System Warning Speaker connector (SPEAKER)
The 4-pin connector allows you to connect the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
• Power Button/Soft-off Button connector (PWRBTN)
The 3-1 pin connector allows you to connect the system power button. Press the
power button to power up the system, or put the system into sleep or soft-off mode
(depending on the operating system settings).
• FlexKey button connector (RESET)
The 2-pin connector allows you to connect the chassis-mounted FlexKey button
(RESET). Press the FlexKey button to reboot the system.
The button will be set to [Reset] by default. You can assign a different function to this
button in the BIOS settings.
1-22
Chapter 1: Product Introduction