2.1.3
Motherboard installation
1.
Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to
the chassis' rear I/O panel.
2.
Place eight (8) screws into the holes indicated by circles to secure the motherboard to
the chassis.
•
DO NOT over tighten the screws! Doing so can damage the motherboard.
•
Ensure that the space above the installed motherboard at least 8cm to prevent the
MOS heatsink from interfering with the radiator or chassis fans.
•
We recommend using an E-ATX chassis when installing this motherboard.
PRIME TRX40-PRO
2-5