Unit Dimensions; Engine Oil Recommendations - Generac Power Systems MGG155 Operating Manual

General Information

Unit Dimensions

A
A
MGG155 - Skid Mounted
MGG155 - Trailer Mounted
MGG210 - Skid Mounted
MGG210 - Trailer Mounted
Specifications are subject to change without notice.

Engine Oil Recommendations

To maintain the product warranty, the engine oil should be serviced in accordance with the recommendations of this
manual. For your convenience, Generac Maintenance Kits are available that include engine oil, oil filter, air filter,
spark plug(s), a shop towel and funnel. These kits can be obtained from an Independent Authorized Service Dealer
(IASD).
The engine has been filled with factory engine oil of a grade recommended by the engine supplier. The manufacturer
recommends an initial oil and filter change after the first 50 hours (or first three months) of service operation. Use a
high quality detergent oil with an appropriate classification and viscosity for the engine type and ambient temperature
conditions. See Specifications
6
B
B
Figure 1 - Unit Dimensions
A
66 in. (1.67 m)
102 in. (2.59 m)
66 in. (1.67 m)
102 in. (2.59 m)
for oil capacity.
MGG155/210 Operating Manual
C
C
B
92 in. (2.33 m)
124 in. (3.15 m)
92 in. (2.33 m)
124 in. (3.15 m)
02020
C
169 in. (4.29 m)
269 in. (6.83 m)
201 in. (5.10 m)
269 in. (6.83 m)
35319 C