Parameters Setting - Daitsu FSTD SLIM - EC FLEX Series Installation And Maintenance Manual

Floor ceiling slim
Table of Contents

Advertisement

6. Keypad lock: Press
this function, any keypad is locked. Press
is not working.
7. Timer ON: With thermostat OFF, press
minutes. Press Up button once to increase 30 min. Press Down button to reduce 30 min once.
8. Timer OFF: With thermostat ON, press
720 minutes. Press Up button once to increase 30 min. Press Down button to reduce 30 min once.
Sleep mode: With thermostat ON, press

Parameters setting

With thermostat OFF, press
from 1 to 20. The number represents 20 parameters.
No1 stands for unit type setting:
0=Air cleaner, Mode Icon only show "Fan". Temperature, RH, CO2, PM2.5, VOCs are shown on LED.
1=AHU unit, Mode Icon show "Cooling, heating, ventilation, dehumidifier, Auto". Only temperature show on LED.
2=Full function unit (AHU+ Air quality). Mode Icon show "Cooling, heating, ventilation, dehumidifier, Auto". Only temperature,
RH, CO2, PM2.5, VOCs are shown on LED.
3=Fan coil thermostat. Mode Icon show "Cooling, heating, ventilation". Only temperature show on LED.
No2 stands for temperature unit setting:
0=degree C
1=degree F
No3 stands for temperature display setting:
0=Room temperature display on LED
1=Setting temperature display on LED
No4 stands for setting temperature range setting:
0=setting temperature range is from 16~30
1=Setting temperature range is fixed. Cooling=24°C, Heating=21°C
No5 stands for temperature band setting: 1~9, default: 1
No6 stands for PM2.5 setting: 30~200, default: 60
No7 stands for PM2.5 band setting: 10~80, default: 50
No8 stands for CO2 setting: 460~1200, default: 800
for 5 seconds to
for 5 seconds to
for 5 seconds to Timer ON setting. The setting time range is from 30 to 720
for 5 seconds to Timer OFF setting. The setting time range is from 30 to
for 5 seconds to
+
for 5s to parameters setting mode. Press
display will be shown. Keypad lock function is working. Under
display will disappear, keypad lock function
display to activate, sleep mode is working.
Page 57 of 71
once, LED number is changed
SK2019 FSTD-SLIM-EC-FLEX-001_01

Advertisement

Table of Contents
loading

Table of Contents