Schlage BE469 Installation Instructions page 2

3d install the new tailpiece, washer and cylinder cap.
Reinstall all pieces and screw the cap into
place. Do not overtighten the cap!
3e install the cylinder back into the Touchscreen.
3f replace the cylinder screw.
4
replace the cable
4a remove the spacer screw from the Touchscreen.
4b remove the spacer from the Touchscreen.
4c remove the existing cable from the Touchscreen and
replace it with the longer cable.
4d reroute cable and reinstall spacer.
5
install the lock.
Install the lock as detailed in the Installation Guide, using the longer
screws you selected in step 2a.
neeD help?
please call customer support before returning the product
to the store.
Toll-Free Calling
From:
Visit our web site for videos, FAQs and more: answers.schlage.com
NOTE: If you are installing
the lock on a door with
a 1Z\x" (38 mm) hole, do
not reinstall the spacer.
U.S.A.: (888) 805-9837
Canada: (800) 997-4734
Mexico: 018005067866
© 2012 Ingersoll Rand
Printed in Country
24156804 Rev. 10/12-a2