Wi-Fi Setup At Generator Controller; Connect To Home Network When Internet Is Available On The Mobile Device - Generac Power Systems Mobile Link Installation And User Manual

Wi-Fi Setup at Generator
Controller
Connect to Home Network When
Internet is Available on the Mobile
Device
The Wi-Fi connection
depending on when it is performed:
• during initial setup and configuration of a
newly-installed generator, or
• on a previously installed and operating
generator.
Newly Installed Generator
1. After the controller is powered up, the
"Install Wizard"
followed by a prompt to select the desired
language (Figure
Figure 3-3. Select Language
2. Select the desired language, press
ENTER, and proceed to the "Setup Wi-fi"
prompt (Figure
Figure 3-4. Setup Wi-Fi Prompt
3. Proceed to Continue Connection
Process.
Installation and User's Manual for Wi-Fi Module
process varies
screen will appear,
3-3).
006624
3-4).
006625
As part of the generator installation process, it
is recommended to connect Wi-Fi during the
initial generator setup and power-up. The
activation code
communicated to the generator controller
through Wi-Fi communication, provided the
generator has been registered and activated
at www.activategen.com
Wi-Fi connection. It also allows the user to
select the operating time zone immediately,
keeping exercise time on track and adjusting
for Daylight Savings Time as needed.
Begin the connection process by following the
applicable steps in the following table.
Previously Installed Generator
1. See Figure 3-5. On the controller, press
ESCAPE to access the first level options
menu. Select "Setup Wifi?" and press
ENTER.
Figure 3-5. First Level Options Menu
2. See Figure 3-6. Select "Yes?" and press
ENTER.
Figure 3-6. Setup Wi-Fi Prompt
3. Proceed to Continue Connection
Process.
Setup and Operation
will automatically
prior to making the
006626
006625
be
9