Wi-Fi Network Signal Strength; Firmware Updates; Wi-Fi Specifications - Generac Power Systems Mobile Link Installation And User Manual

Wi-Fi Network Signal Strength

If the home Wi-Fi
insufficient for communicating
generator, a wireless
booster) can be installed in the home.
Wireless repeaters may be purchased from
any local computer or electronics retailer.

Firmware Updates

Occasional updates may be released for the
generator controller
(firmware). Once installed and activated, the
Wi-Fi module enables automatic reception of
firmware updates as sent directly from the
manufacturer.
Installation and User's Manual for Wi-Fi Module
signal strength is
with the
repeater (signal
operating system
General Information and Setup

Wi-Fi Specifications

Specification
Networking
standard
Transceiver
Module operating
power
Cable
Supply voltage
(V+ to GND)
RS 485 charge
-
spike rejection
(either A or B); line
idle
UL Listing Number
FCC ID
(See engine divider
panel for label
location)
IC Certification
CE
Telec
Value
IEEE 802.11.b/g/n
RS485
5 VDC
RS485
Nominal: 5 VDC
Minimum: 4.3 VDC
Maximum: 6.2 VDC
Minimum 1.5 nC
FTPM/E359637
YOPGS2101M
9154A-GS2101M
R1603222
211-160302
7