Rexroth IndraDrive
13.2 Stacked Devices
Counterclockwise Cable Routing
DOK-INDRV*-HMV-*******-PR01-EN-P
Risk of voltage arcing!
⇒ If devices are stacked in the control cabinet, the
connections for the DC buses between the devices
have to be correctly made.
CAUTION
The
connection
depends
counterclockwise).
The following figures show the correct DC bus connection for stacked
devices. The illustrated way of connection keeps bare wire sections from
being situated directly vis-à-vis. This avoids voltage arcing.
device 1
(DC bus connection)
device 2
(DC bus connection)
Fig. 13-3:
DC bus connection for counterclockwise cable routing
on
the
cable
device 1
(DC bus connection)
device 2
(DC bus connection)
correct
13-3
Appendix
routing
(clockwise
or
incorrect
DC bus nach links_hmv