Advertisement
Transporteur Rack
What's Included
1
Weight Limit
Do not exceed 20 kg (44 lb).
Safety
Do not move your GSD by the Transporteur Rack.
Secure all cargo before riding. Take care that all straps are tied down and any loose item is secured.
Installation
Tools required (not included)
5 mm Allen Wrench
10 mm Open-End Wrench
5 mm
10 mm
1. Fit the Rack onto mount and insert Bolts, Washers, and Nuts, as shown above.
2. Tighten Bolts to a torque of 10 Nm – 12 Nm.
3. Secure the Cables with the Cable Strap.
Check that cables and cargo do not interfere with steering and/or braking
before riding.
Make sure the Cable Strap location does not interfere with Physis
handlepost operation.
ternbicycles.com
2
3
4
1. Transporteur Rack
2. Bolt Set x 2
M6 x 50 mm
M6 Washer
M6 Nut
3. SideStrap x 1
4. Cable Strap x 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tern Transporteur Rack
Summary of Contents for Tern Transporteur Rack
- Page 1 Weight Limit Do not exceed 20 kg (44 lb). Safety Do not move your GSD by the Transporteur Rack. Secure all cargo before riding. Take care that all straps are tied down and any loose item is secured. Installation Tools required (not included)
- Page 2 Product. Tern, the Tern Werd (logotype), and the Tern Berd (device), GSD and Transporteur Rack, used alone or in combination are trade names, trade devices or registered trademarks of Mobility Holdings, Ltd.
Need help?
Do you have a question about the Transporteur Rack and is the answer not in the manual?
Questions and answers