Transferring Your Faxes Or Fax Journal Report; Changing Lcd Language - Brother MFC-240C User Manual

Transferring your faxes or Fax
Journal report
If the LCD shows:
Change Unable XX, Clean Unable XX,
Init. Unable XX, Print Unable XX or
Scan Unable XX
we recommend transferring your faxes to
another fax machine. (See Transferring faxes
to another fax machine as detailed below.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine as detailed in this
page.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine
If you have not set up your Station ID (see
Quick Setup Guide page 12), you cannot
enter fax transfer mode.
a
Press Menu, 9, 0, 1.
b
Do one of the following:
If the LCD shows No Data, there are
no faxes left in the machine's
memory.
Press Stop/Exit.
If the LCD shows Enter Fax No.,
enter the fax number to which faxes
will be forwarded.
c
Press Mono Start.
Troubleshooting and Routine Maintenance
Transferring Fax Journal report to
another fax machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode.
a
Press Menu 9, 0, 2.
b
Enter the fax number to which Fax
Journal report will be forwarded.
c
Press Mono Start.

Changing LCD language

You can change the LCD language.
a
Press Menu, 0, 0.
0.Initial Setup
0.Local Language
b
Press a or b to select your language.
Press OK.
c
Press Stop/Exit.
B
B
B
97