Roscoe Medical OBT-TILT Instructions

Deluxe Tilt-Top Overbed Table
Parts List
1. Table Top (Small); 2. Table Top (Big)
3. Release Handle; 4. 1/4 -20 Bolt &Nut! 1 each"
1. Table Top (Small)
5. Top Bracket Tube I 7. Top Bracket Tube II
2. Table Top (Large)
8. Bracket Connecting piece; 9. Fixed Knob
3. Release Handle
10. Bolt Sleeve; 11. Bolt Plate; 12. 3/8 -18UNF Bolt;
4. 1 / " #20 Bolt & Nut (1 Each)
4
13. 1/4 -20 Bolt! black" ; 14. 1/4 -10 Bolt! white" ;
5. Top Bracket Tube 1
15. Drawn Pipe ;16. Spacer; 17. Column Assembly;
6. Top Bracket Tube II
18. Washer; 19. Triangle Knob;
7. Bracket Connecting Piece
20. Stand Pipe Stopper.; 21. Stand pipe. 22. Base
8. Fixed Knob
23. Caster with Lock! 2 each" ;
9. Bolt Sleeve
24. Caster without Lock! 2 each"
10. Bolt Plate
11. / " #18 UNF Bolt
3
8
12. 1 / " #20 Bolt (Black)
4
Assembly Instructions
1. Remove contents from packaging and lay Top Boards
(1 & 2) upside down on flat surface with Mounting Tubes
(5 & 6) facing upward. See Fig. 2.
5
1
Item #: OBT-TILT
13. / " #10 Bolt (Chrome)
1
4
14. Draw Pipe
15. Spacer
16. Column Assembly
17. Spacer
18. Triangle Knob
19. Stand Pipe Stopper
20. Stand Pipe
21. Base
22. Caster With Lock (2)
23. Caster Without Lock (2)
24 Outer Tube
6
2
FIG. 2
2. Take the Column Assembly (16) and place Trip Lever (3) on
top of Trip Rod and secure with Bolt and Nut (4) See Fig. 1.
3. Remove Triangle Knob (18), Spacer (17) and the
Inner Tube (14) from the Outer tube (24). See Fig. 3.
17
18
4. Insert Outer Tube (24) on the Column Assembly through
Mounting Tube (5) on the Short Top first (6). Then insert
Outer Tube through the Mounting Tube (6) on the Large Top
(2). Insert Inner Tube (14) through Mounting Tube (6). Tighten
the Fixed Knob (8) into the "Hole" on Outer Tube (24).
17
18
5. Replace the Triangle Knob (18) and Spacer (17), then secure
by tightening the Knob.
6. Install the two Casters With Lock (22) into the side of the
Base (21) which connects to Column Assembly (16). Install
two Non-Locking Casters (23) into the opposite side of the
Base (21). See Fig. 5.
22
Column end of base
with 2 holes
Page 1
4
3
16
FIG. 1
16
24
Hole
14
16
24
Hole
LOCK (22)
21
FIG. 5
FIG. 3
14
FIG. 4
23