Pottery Barn Meredith Vanity Assembly Instructions

Pre-Assembly:

•

Please read all instructions carefully before beginning assembly.

•

Save all packing materials until the vanity is fully assembled to avoid accidentally discarding any small parts or

hardware.

•

Use the parts and hardware lists to identify and separate each of the components included.

•

For your safety, assembly by two people is recommended.

(1) Table Top - A

(8) Flat Washer - D

Assembly Instructions:

1. Carefully remove the two side drawers (at left and right side). Gently place the table top (A) face down on a carpeted

or scratch-free surface.

2. Attach legs (B) to the table top by aligning the inserted nut on each leg to the pre-drilled holes at corner of the table

top (A). Secure using the flat washer (D), lock washer (E) and allen bolt (F). Tighten with the allen key (G). See

Illustration 1.

Meredith Vanity

Assembly Instructions

(4) Legs - B

(8) Lock Washer - E

(1) Wood Plate - C

(8) Allen Bolt - F

(M6 x 38 mm)

(1) Allen Key - G

Table of Contents

Do you have a question about the Meredith Vanity and is the answer not in the manual?

Page 1 Meredith Vanity Assembly Instructions Pre-Assembly: • Please read all instructions carefully before beginning assembly. • Save all packing materials until the vanity is fully assembled to avoid accidentally discarding any small parts or hardware. • Use the parts and hardware lists to identify and separate each of the components included.
Page 2 Illustration 1 3. Carefully turn the table with assembled legs upright. Re-insert the two side drawers. Use the wood plate (C) to cover the cut out at back of table top. Note: Inside the side drawer there is a magnet catch which can hold the wood plate (C). Plate can be stored inside the drawer when not in use.